TOPXGUN AGRI ACADEMY
In this tutorial, we will learn some instructions on switching spreading mode and drone spraying mode.
When switching spraying and spreading mode, some clients remove the sealing ring for the convenience of connecting the adapter cable, which may cause a short-circuit situation, actually the sealing ring has a waterproof role.
If the connection is not smooth, you can apply a small amount of grease.
After replacing the broadcast, the connecting wires of the front and rear centrifugal spray nozzles should be docked to prevent dust from entering when broadcasting, resulting in malfunctioning of the interface after switching sprays.
When flushing the aircraft, spraying or broadcasting near the HUB board, be sure that the interface is plugged in before flushing to prevent damage caused by loose water ingress.